Which handheld transmitter can be used to operate the radio shutter motors?

The Superrollo radio tubular motors are usually delivered with the hand transmitter ST110 - 1 channel.

The ST115-2 handheld transmitter with 5 channels is also available as an accessory.

ST110-2 ST115

Registering the remote control to the motor

If the motor is installed on the right side of the shutter box, establish the radio connection between the motor and the remote control in this way.
➢Switch off the motor.
➢Wait about 10 seconds.
➢Switch the motor on again.
The motor jerks briefly
➢Press the stop button for 2 seconds.
You will hear three short beeps coming from the motor

Changing the direction of rotation

If the key assignment does not match the movement of the motor, the direction of rotation
can be changed.
Observe time limit
The direction of rotation must be changed within 30 seconds after logging on to the motor.
1. On the 5-channel radio transmitter ST115-2, please use the outer keys to select the channel on which the motor is to be logged on
. Only one LED may light up (All LEDs = all channels)
2. Press the UP and DOWN keys simultaneously and hold them down for 2 seconds.
The motor starts up briefly.
3. Release the keys again. Changing the direction of rotation was successful.